ABOUT AUTO-PING
The Auto-Ping feature allows the unit to automatically detect failed equipment and switch automatically. You set one or two IP addresses to be periodically Ping'ed. When the programmed fail conditions are met, the programmed switching function is actuated. Three functions are possible:
Switch & Remain:
Switch to B on Ping loss and remain until switched back via web, or TCP Messaging
Switch & Return:
Switch to B on ping loss and back to A when ping response resumes
Hunt for Ping:
On loss of ping, switch to B and look for ping response, if no ping detected, switch back to A. Repeat until ping response is detected and remain there until ping is lost again.
Dual-Alternate:
Switch to whichever ping that responds. Both/Neither = No Change
Dual-Last:
Switch to position based on last ping response. Whichever IP address most recently changed from no response to response
Custom:
Create your own logic table for switching. Enter the action required for each combination of ping OK or No Response for A, B or both.