|
|
|
|
|
|
CALL: 201-934-9944 / 800-436-3284
Home >
Monitor & Control > iPIO-8 Ethernet I/O

Web Relay Control, Ethernet I/O &
Contact Closure Transport Across the Network
  1. General
  2. Operation
  3. Applications
  4. Specifications
  5. Support

The most flexible, networked relay controller available

  • Web Browser Relay Control

  • Ethernet I/O

  • Transport GPIO over the Network

  • Contact Closure via IP

  • Link Supervision with Alarm

  • Email Notification

  • SNMP Manageable

  • SSL and AES Encryption

  • 8 Form C Relays

  • 8 Digital Inputs - Wet or Dry

  • One Input to Many Outputs

  • Many Inputs to One Output

  • Any to Any - Many to Many

       
ipio web control of relays, contact closure transport over network
Buy Now
 
iPIO-8
$ 395.00
ELK-912-2 Dual Relay Board
$ 30.00

Let your circle know about us.


Visit us for more news and special offers
Need More Current?

iPIO-8 Relays support 0.5A @ 120VAC or 1A @ 24VDC (See full specifications).

If larger current capacity is required, add the ELK-912-2 relay board to support 7A @ 30VDC 10A @125VAC.

ELK 912-2 relay board

If switching even higher current A/C then use the iBoot-IO for 12A.

iBoot-IO relay controlled power switch
iPIO-8 Front and Rear
Both Inputs and Outputs in the same unit!

Order two units for contact closure transport.
 
  The iPIO-8 is a network attached, IP addressed digital input and output device. The iPIO-8 can be controlled and monitored with a standard web browser. Multiple ipIO-8 devices can communicate amongst themselves to transport I/O information across the network.        Highly flexible telemetry systems can be developed with these simple devices.  Dataprobe can also taylor Custom and OEM applications for your specific needs from this flexible development platform.
 
  This unit replaces the COE-8 series.
We offer a firmware package that emulates the COE-8 for legacy systems.
 

Click to Learn More About iPIO Applications
Web Control 8 Relays, 8 Inputs. SNMP Managed, Email Notification. Transport contact closures across the network Distribute Alarm Information to Multiple Locations
Manage 8 Relays, 8 Inputs Send GPIO Across the Net Broadcast Alarm Status
 
Operation

Simple Web Browser Control and Monitoring


The Status and Control web page provides real time status of the inputs, outputs and remote iPIO unit connections. 

The top of the page indicates the location reference, which is user settable.

Each input, output and remote device is defined by a user selectable name. Inputs and outputs can also be assigned names for Open and Closed statuses, as well as background and text colors for each. All configurations are accomplished via the setup tab at the top of the screen.

If the iPIO-8 is programmed to communicate with additional units, each remote unit will be displayed at the bottom of the page. Each remote site displays red or green, indicating connection status. 

 web control relay and status using ipIO. 8 form c relays and 8 digital inputs.
 

Easy Web Setup


All configuration parameters are set up using the clean web browser interface. Each location, input, output and remote device can be user named for easy identification. Open and Closed status for both inputs and relay outputs use user selectable colors for quick identification and instant understanding of your entire network.

All Status, Control, and Setup functions are password protected. Two levels of password access restrict setup functions to administrators only.

Configure multiple SNMP managers and email notification addresses to give you immediate notification of any event.

relay setup for ipIO. Control 8 form C relays and monitor 8 digital inputs
 

Monitor and Control Utility


The iPIO Monitor and Control Utility (MCU) is included for management of multiple iPIO systems.

Each unit displays its status inputs and the relay outputs can be controlled. A log file of all activity of all units is kept for record keeping and review.

 iPIO Montor and Control Utility. Screenshot.
 

iPIO Open Protocol


iPIO-8 units communicate using Dataprobe's Exchange Protocol (DxP). This protocol is published for system designers to use to integrate the iPIO into their own software applications.

Download the protocol documentation as well as software examples from the Resources tab
ip = sys.argv[1]
ch = int(sys.argv[2])
st = int(sys.argv[3])
uid = 'u'
pas = 'p'
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
port = 9100
s.connect((ip, port))
s.send(hello)
seq = s.recv(2)
value = struct.unpack("
seq1 = value[0]+1 # add 1 to it and turn it back to two bytes
seq1a = struct.pack("
s.send('\x03'+p_uid+p_pas+'\x01\x00'+seq1a+ch_ar[ch]+mode_ar[st])
ack = s.recv(1)
if ack == '\x00':
print 'OK'
else:
print 'ERROR'
# close the socket, we're done.
s.close()
Applications
The ipIO is uniquely capable of a wide range of digital input and output applications:
  • Environmental Monitoring
  • Manufacturing Control
  • Factory Automation
  • Process Control
  • Manufacturing Test Systems
  • Security and Gate Control
  • Ethernet I/O Transport
  • Custom OEM Solutions
  • Building Automation Systems
  • Custom OEM Solutions
  • Laboratory Automation

 

 

 iPIO web controlled relays. Remote control eight relays and monitor eight status inputs.

Transport Digital I/O across ethernet networks with IP protocols using the ipIO.  Configure pairs of ipIO units to monitor up to eight digital inputs, any changes in status appear at the other end of the network as eight relay outputs. 

The ipIO provides constant link supervision, alerting you to link failure, so you always know you system is operational before it is needed.

ipIO links are bi-directional, so events in either location are reflected at the other site.

 bi-directional transport of contact closure relays over the network. iPIO-8 contact closure transport over network application.

One digital input can trigger relay controls at multiple remote locations. Imagine one alarm input triggering events throughout your network, in the same building, or across the globe.

  • Climate Control
  • Security Alert
  • Firehouse Doors
  • Irrigation Systems
  • Industrial Control

One Input to Many Outputs
Any Input to Any Output
 One input can control mutliple remote outputs at up to 32 locations. iPIO-8 alarm event distribution.

Events from multiple locations can be consolidated to a central alarm point. Digital inputs from any iPIO unit can be mapped to the relay output of any other.    Where multiple inputs are mapped to a single relay, the relay always reflects the last changed status of any of the inputs.

  • Environmental Alarm Summary
  • Storm Warning Systems
  • Security Alert
  • Pump Control

Many Inputs to One Output
Any Input to Any Output
 Mutliple alarm sites can report to central location. iPIO-8 multi-site event application.
Specifications
Physical
5.25"W x 5.5"D x 1.75"H (13.3 x 14.0 x 4.5 cm)
Environmental
Temperature
0 - 70 Deg C Operating
Humidity
90 Pct Non Condensing
Power
Wall Mounted Power Supply, 105 - 240 VAC 50/60Hz or +5VDC direct.
Power supply with universal plug options.
Connections
2 Terminal per Input. (common ground)
Three Terminal per Relay Output (Form C)
LED Indictors
8 x Input.
8 x Output.
Network Link and Activity.
Remote Unit Link Status.
Power
Inputs
8 Digital Inputs.
Dry relay/switch closures or
+/-3VDC to +/-30 VDC
Grounds common
Control Relay
Current Maximums
0.5A @ 120VAC or 1A @ 24VDC
Switching Power
60VA Max 50uW Min
Switching Voltage
120VAC or 60VDC Max 1VDC Min
Switching Current
1A Max 1mA Min
Resistance
100 milliohms (initial value)
Operations
5 Million, mechanical. 100K at maximum load
Network

HTTP Web Server
SSL Security - Optional
AES Encryption on Inter-device communication - Optional
SNMP Manageable
Email notification to SMTP Server
DHCP Assigned or Static IP Address
Port Selectable for http, https and Inter-device communications
Inter Device Communications via TCP/IP Protocol, supplied.
Support
Standard Resources
Operations Manuals
Installation and Operations Instructions
Quick Start Guide
Get your iPIO-8 up and running immediately
SNMP MIB
Discover, SNMP V2 MIB
Device Management Utility (DMU)
Discover, IP Set, Firmware Upgrade and Reset Factory Defaults
Monitor & Control Utility
Monitor and Control Multiple IPIO-8 Units
Programmer Resources
Direct TCP/IP Protocol
 Write your own applications
C Examples
 Using the protocol examples in C Source, and .exe
Code Examples
 Using the protocol examples in Python
Upgrade Resources
Latest Version
 ipio8_upg_1.20.104 Incl. Fimware, DMU, Manuals
Special Version
 iPIO-COE Emulates COE-8 protocol for legacy customers
|
|
|
|
|
|
|
|
|
|


COPYRIGHT © Dataprobe, Inc.

1B Pearl Court, Allendale NJ 07401    Tel: 201-934-9944 / 800-436-3284