Fallback switching for your critical communication circuits is just a click away with these web enabled A/B Switches. Switch one Common circuit to either circuits A or B from anywhere in the world. Just point you browser to the IP address of the switch, enter a username and password and click on either A or B button to reroute traffic. It's that easy. In addition to the web browser control, these switches can also be operated by:
Automatically, by pinging a device and swtiching automatically when the ping fails.
From an SNMP Manager
Direct TCP messages
Manual Front Panel Toggle Switch
Available in Standalone and Rack Mount Models, 120VAC, 220 VAC and 48VDC.
Point your browser to the IP address assigned to the switch, enter a security code and click on the button to operate the switch.
Set-up allows access to the following features:
Location Name. An identifier for that switch
Dual Passwords. User for control only, Admin for control and setup
SSL. Enable SSL for added security
Auto-Ping features. See below.
IP Address, Gateway and Subnet Mask
Alternate HTTP. Allows web control behind NAT routers and where security blocks port 80
SNMP. Select up to 4 Managers and the level of Trap notification
Email. Configure for email notification of switch activity.
