Card Nest K-AB-R-16L
|
Physical Specifications
| 19" W x 8.75" H x 7" D |
Weight: 11.5 Lbs (w/o cards) |
|
System Environmental |
Temperature
| Operating: 0 to 65 C |
Storage: -10 to 85 C |
Relative Humidity 0 to 95% Non-Condensing |
|
Card Nest Slots |
1 Power Supply Slot |
1 Control Card Slot |
16 A/B Card Slots |
|
Power Supplies
Wide Range A/C Input
Model K16-PCM-WRI 1 Full Slot
Model K16-RPC-WRI 1/2 Slot |
Input Power
Nominal : 120/240 VAC 50/60 Hz |
Watts: 50 |
Fusing: 3 A |
Physical
AC Input connector: IEC 320 (C14) on rear panel
|
K-R-PCM-48 48 VDC Input |
Input Power
Nominal : 48 VDC |
Range : 42 - 60 VDC |
Watts: 75 |
Fusing: 2 A |
Physical
Plug in rack card installs from rear of nest
DC Input Connector: Nylon DC Connector in, Mating Connector Supplied.
|
K16-PAM-24 Dual Power Access |
Provides for connection of two K-16-XPS Power Supplies
Input Power
Nominal : 24VDC |
Range : 20 - 30 VDC |
Watts: 50 |
Fusing: .5 A Slo-Blo |
DC Input Connector Power In: 6 Pin to match K16-XPS K-16 Input Connector.
Mating cable supplied with K-16-XPS
Power Status
All power supply modules provide form C alarm outputs as well as status indication LED and via control card. Alarm connection 9 Pin D'Submimiature. Contact Ratings: 1A @ 24VDC res.
|
Control Cards
iP-K16-R Network and Serial Control |
Connections
Network 10Base-T Ethernet
|
Serial 9Pin D'subminiature, Male, Configured as DTE. |
| Power In: 6 Pin to match K16-XPS |
Protocols Supported
| HTTP (Web) Telnet,
TCP Messaging Protocol. Port Assignments and MTU Settable. |
|
G-K16-R Gang Control Expansion Card |
Connections
Gang In: RJ11 Modular Jack |
Gang Out RJ11 Modular Jack |
Power In: 6 Pin to match K16-XPS |
|
T-K16-R Extended I/O Control Card |
Connections
Control In 50 Pin Amphenol, Female |
Status Out: 50 Pin Amphenol, Female |
Power In: 6 Pin to match K16-XPS |
|
A/B Switch Cards |
Current models shown. Please call for latest available models.
K16-D9-L-R |
9 Pin D'Subminiature, Female connectors.
All 9 Pins switched. |
K16-D15-L-R |
15 Pin D'Subminiature, Female connectors.
All 15 Pins switched.
|
K16-D25-L-R |
25 Pin D'Subminiature, Female. All 25 pins switched. Jumper options for frame and signal ground, switched or unswitched. |
K16-HD44-L-R |
44 Pin High Density D'Subminiature, Female. All 44 pins switched. |
K16-RJ8-L-R |
8 Wire Modular Jack. All 8 wires switched. Applicable for all 8 wire applications up to 16 Mhz, including T-1, E-1, RS-232, 10Base-T, Cat3, USOC RJ41 through RJ48, TIA 568A and B. |
K16-2RJ8-L-R |
Dual 8 Wire Modular Jack. Dual A/B switch card for all applications as listed above. Both A/B Switches operate simultaneously.
For Gang and E-1 applications. |
K16-RJ100-L-R |
8 Wire Shielded Modular Jack. All 8 wires switched. 10/100/1000 Ethernet |
K16-BNC-L-R |
BNC 50 or 75 Ohm. Applications up to 16 Mhz. |
K16-2BNC-L-R |
Dual BNC, 16 Mhz. Dual A/B switch card for all applications as listed above. Both A/B Switches operate simultaneously. For Gang and E-1 applications. |
K16-DS3-L-R |
Dual BNC for 45 Mhz DS-3 applications. Both A/B Switches operate simultaneously. |
K16-T50-L-R |
50 Pin Telco (Amphenol). Requires two card slots. |
|
