|
|
|
|
|
|
CALL: 201-934-9944 / 800-436-3284
Home >
ALL Products > Remote Reboot
Save: Time, Money, Energy, Downtime.

Super Hero of Uptime When critical systems are in remote locations, the cost of downtime in service calls, lost revenue, staff time, travel expenses and customer frustration becomes unbearable

Give downtime the boot with Dataprobe remote power control. Keep downtime to a minimum with automatic failure detect-and-reboot, and managed power control to bring crashed systems back on-line; generating revenue and happy customers.

  • Minimize costly system downtime
  • Reduce service calls and site visits
  • Maintain revenue and customer satisfaction
  • Low Cost: ROI with 1st service call averted!

Remote Reboot for:
Dataprobe Power products are UL Listed. Others are not.

Learn why that is important.
Read What Our
Customers Say
We employ iBoots so that our computers can turn power on and off to the large format LCDs, videowall displays and digital banners we use. By turning them off at night when the airports are closed, we extend product life and reduce maintenance. Shutting a $7-20K display off for 5 hours a day, we theoretically expand it's life by roughly 20% - not a bad tradeoff for a $275 investment.
H.Smythe, IAA
iboot remote reboot and remote power control for one outlet.

Remote Reboot From Any Browser!


Just point your browser to the IP address, enter the Password and you're one click away from power ON, OFF or a timed reboot. Its that simple. The unique Automatic Control features allow iBoot to monitor any IP device on the network and take automatic action whenever the device is down. 

Your Best Value in Remote Power Management!

iBootBar NEMA version.  Remote Reboot viw web, telnet, SNMP, DTMF phone.
iBootBar International (IEC) version.  Remote Reboot viw web, telnet, SNMP, DTMF phone.
Dataprobe's Rack mounted network controlled power distribution Units (PDU) allow remote power management to reboot, or power on or off any A/C device.  Eliminate the need for costly trips. Save time, money and Uptime!
K-815 and K-810 contact closure controlled power strips.

Serial and Contact Closure Control


Use your existing RS-232, GPIO or relay control system to operate these 8 Outlet rack mount power switches
Power Pal remote reboot power control via phone line

Remote Reboot from your Phone


Turn power ON, OFF or Reboot (Power Cycle) remote equipment from anywhere in the world by entering tone (DTMF) digits using an ordinary tone dial phone.

Unique phone line pass through capability regenerates the ring to you downstream devices, making this unit work where all others can't
remote power controller from contact closure.  Models K-10-IEC, K-103

Remote Power Control Switches


Lead controlled power switches. Integrate remote power control into your network management system.

Add remote power control you your existing systems for automated testing facilities
Crashed systems are a fact of life. Minimize downtime with these automatic and remote power management solutions. Our remote power control products will save the day, letting you reboot, reset or control locked-up equipment at remote locations. Big savings on travel and downtime make for happy customers!

Network power switch the simplest and quickest way to bring crashed systems back to life. SNMP management allows these network controlled power switches to be integrated into your network management operations. Out-of-band access, via serial port or tone dial telephone allows remote power access even when the network is down.

Dataprobe remote reboot and power control. Intelligent remote power control for reboot of servers, routers, kiosks. Network power switch for A/C power up to 30 Amps. Reboot via web, telnet, phone, modem, serial, com port, RS-232. Automatic and remote control power switch for security, energy management, reboot. Manage from one to 1000 outlets. Intelligent power reboot.

See all Remote Reboot Products


|
|
|
|
|
|
|
|
|
|


COPYRIGHT © Dataprobe, Inc.

1B Pearl Court, Allendale NJ 07401    Tel: 201-934-9944 / 800-436-3284