Dataprobe supplies both 4 and 8 outlet rack mount power
strips.
Use 4
Outlet power strips
1) To distribute remote power control to multiple
cabinets.
Cabinet 1 uses
iP-415 for Web / Telnet Control. Cabinet 2 uses K-415 with control
cable between two cabinets. All 8 outlets are
manageable.
2) To provide higher current than 20 amps
combined
A single cabinet uses the iP-420 for 4 outlets
sharing a 20 amp circuit. An expansion unit K-420 is used to switch
4 additional outlets on a separate 20 amp circuit.
3) To Mix and Match Rack and Standalone Power Switches
4 Outlet
power strips can also be combined with individual power modules like the K-12A, K-10-IEC and K-30A for even
greater power distribution and current switching capacity.
